REVOLUTIONARY Carbon Paint Heating System
The CeP range allows the custom building of SELV electric radiant heaters onto existing drywall / plasterboard walls using specially designed components and techniques. The CeP range allows the possibility of building radiant heaters with various outputs. It’s components and installation techniques have been designed for use by qualified and trained personnel.
Turn any plastered/plasterboard wall into a radiant heater
By using our special techniques the CeP can turn any wall or ceiling into a very energy efficient radiant heater. Using low energy consumption the CeP is the world’s first ever electric paint on system. Using safe extra low voltages (24V) the CeP is suitable for every type of room.
Developed as a means for accelerated project installations, industry standard boards are printed with the CeP technology embedded onto the surface. The plasterboard is then cured, sealed and ready for shipping. Each board comes with a pre-terminated pair of fire rated cables for easy connection onto its 24V circuit. The boards are designed for industry standard metal or wood partitions with fixing points at 400mm centres . Once installed the board is ready for gypsum skim coat plaster finish or paper tape and joint and allowed to dry before the 24V power is applied.
Spraying or paint roller application
EcoVolt CeP can also be applied by use of a spray gun or by a paint roller. The spray gun is one of the most effective method and increases production application time as only one coat is required. The paint roller method is ideal for retro fit projects where a spray gun may cause splashing damage to existing structures. The paint roller requires 2 coats and therefore slows down the application time. When completed, both methods are very effective with the end results providing a very efficient heating system. Talk to us about our EcoVolt CeP installation kits.
Paint over with your favourite colour
The CeP system when installed can be completely painted over using any water based decorative paint making it invisible to the naked eye. No requirement for any boilers, radia- tors, pipes, water, tanks, gas or oil. The wall or ceiling becomes the radiator which will free up valuable space in your property.
Single heating zones to multiple heating zones
The CeP can be installed as a single heating zone for one off installations or can be designed and specified for large multiple heating zones. The applications is endless and can cover a vast number of sectors including healthcare, hospitality, education, retail, industrial, commercial and residential.
Energy savings compared to traditional heating systems
Benefit from energy savings compared to traditional heating systems. Only 350 watts / m2 consumed per heating zone. Powered by 24V technology, the CeP low consumption rate with high heat output can be integrated with Solar PV and battery energy storage systems to further assist with energy savings.
Superior control at your finger tips
The CeP system also enjoys having EcoVolt’s award winning central control touchscreen panel (CSD16/2) integrated in every Heating Control Unit (HCU). This facility allows for multiple – zone control without the requirement for any complex wiring. Utilising radio frequency control with superior signal strengths the CSD16/2 can send commands to the HCU from distances of up to 40 meters through floors, walls and ceilings.